TECHNICAL SPECIFICATION

Aluminium is a soft, durable, lightweight, ductile and malleable metal with appearance ranging from silvery to dull gray, depending on the surface roughness. Aluminium is nonmagnetic and does not easily ignite. A fresh film of aluminium film serves as a good reflector (approximately 92%) of visible light and an excellent reflector (as much as 98%) of medium and far infrared radiation. The yield strength of pure aluminium is 7-11 MPa, while aluminium alloys have yield strengths ranging from 200 MPa to 600 MPa. Aluminium has about one-third the density and stiffness of steel. It is easily machined, cast, drawn and extruded. Corrosion resistance can be excellent due to a thin surface layer of aluminium oxide that forms when the metal is exposed to air, effectively preventing further oxidation. The strongest aluminium alloys are less corrosion resistant due to galvanic reactions with alloyed copper. This corrosion resistance is also often greatly reduced when many aqueous salts are present, particularly in the presence of dissimilar metals. Aluminium is one of the few metals that retain full silvery reflectance in finely powdered form, making it an important component of silver-colored paints.

WHAT OUR PRODUCTS OFFER WITH RESPECT TO THE TECHNICAL SPECIFICATION

• Corrosion-Resistant
• High Strength-to-Weight Ratio
• Ease of Fabrication
• Ease of Fastening and Assembly
• Versatility in Joining
• Durable, Resilient and Strong etc.

.